Electronics » Motion Control Modules » Brushed DC Motor Drivers »
DRV8835 Dual Motor Driver Carrier
This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering up to two small, low-voltage motors. The carrier board has the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Description | Specs (15) | Pictures (9) | Resources (6) | FAQs (0) | On the blog (9) | Distributors (71) |
|---|
|
DRV8835 dual motor driver carrier. |
|---|
 |
DRV8835 dual motor driver carrier with included hardware. |
|---|
 |
DRV8835 dual motor driver carrier, bottom view with dimensions. |
|---|
 |
DRV8835 dual motor driver carrier, labeled top view. |
|---|
 |
Minimal wiring diagram for connecting a microcontroller to a DRV8835 dual motor driver carrier in in-in mode. |
|---|
 |
Minimal wiring diagram for connecting a microcontroller to a DRV8835 dual motor driver carrier in phase-enable mode. |
|---|
 |
Two DRV8835 dual motor driver carriers plugged into a breadboard. |
|---|
 |
TI SN754410 (16-pin DIP) next to the #2135 DRV8835 carrier (14-pin DIP) and #2990 DRV8838 carrier (10-pin DIP) for size reference. |
|---|
 |
Schematic of the DRV8835 dual motor driver carrier. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
