Electronics » Sensors » Accelerometers, Gyros, & Compasses »
L3GD20H 3-Axis Gyro Carrier with Voltage Regulator
This sensor is a carrier/breakout board for the ST L3GD20H three-axis gyroscope, which measures the angular rates of rotation about the roll (X), pitch (Y), and yaw (Z) axes. Angular velocity measurements with a configurable range of ±245°/s, ±500°/s, or ±2000°/s can be read through a digital I²C or SPI interface. The board has a 3.3 V linear regulator and integrated level-shifters that allow it to work over an input voltage range of 2.5 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Compare all products in Accelerometers, Gyros, & Compasses or MEMS Sensors.
| Description | Specs (10) | Pictures (6) | Resources (9) | FAQs (0) | On the blog (4) |
|---|
Dimensions
| Size: | 0.4″ × 0.9″ × 0.1″1 |
|---|---|
| Weight: | 0.6 g1 |
General specifications
| Interface: | I²C, SPI2 |
|---|---|
| Minimum operating voltage: | 2.5 V |
| Maximum operating voltage: | 5.5 V |
| Axes: | pitch (x), roll (y), and yaw (z) |
| Measurement range: | ±245, ±500, or ±2000°/s3 |
| Supply current: | 6 mA |
Identifying markings
| PCB dev codes: | gyr03b |
|---|---|
| Other PCB markings: | 0J7920 |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
