Hand Tools »
Crimping Tool: 0.08-0.5 mm² Capacity, 20-28 AWG
This crimping tool can be used to crimp both male and female versions of our JST RCY connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1″ housings onto 20-28 AWG wires to make custom cables. The crimping die has a width of 4 mm, and the tool offers ratcheting action for increased consistency and ease of use.
| Description | Specs (0) | Pictures (5) | Resources (3) | FAQs (0) | On the blog (0) |
|---|
 |
Crimping tool: 0.08-0.5 mm² capacity, 20-28 AWG. |
|---|
 |
Crimping tool: 0.08-0.5 mm² capacity, 20-28 AWG. |
|---|
 |
Preparing a wire and crimp pin. |
|---|
 |
Aligning the crimp pin in the tool. |
|---|
 |
Correctly crimped 0.1" housing crimp pin using the narrower (0.08-0.5 mm²) crimping tool with two cavities (product #1929). Note that only part of the wire barrel is crimped. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
