MEMS Microphone Breakout Board

Pololu item #: 1621

This product has been discontinued.

Ready to add sound detection to your next project? This small breakout board from SparkFun couples a tiny microelectromechanical system (MEMS) microphone with a 100x gain external amplifying circuit, converting sound into analog voltage signals that can be measured by a microcontroller’s analog-to-digital converter (ADC). The unit comes fully assembled as shown and works from 1.5 to 3.6 V.

 Description Specs (0) Pictures (3) Resources (4) FAQs (0) On the blog (0) 

Note: SparkFun has discontinued this product. We now offer SparkFun’s ADMP401 MEMS microphone breakout board

Ready to add sound detection to your next project? This small breakout board from SparkFun couples a tiny microelectromechanical system (MEMS) microphone with a 100x gain external amplifying circuit, converting sound into analog voltage signals that can be measured by a microcontroller’s analog-to-digital converter (ADC). Power is supplied to the VCC pin and should be between 1.5 to 3.6 V. The breakout board pins have a 0.1" pitch and work with 0.1" male headers and 0.1" female headers.

Related Products

Electret Microphone Breakout Board
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Female Header: 1x3-Pin, Straight
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack
Servo Extension Cable 24" Female - Female
ISD1932 Voice Recorder Carrier
50mm Speaker: 8 Ohm, 1 W

Related Categories

Premium Jumper Wires
Wires with Pre-Crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors