Electronics » Sensors » Gas Sensors »
Pololu Carrier for MQ Gas Sensors (Bare PCB Only)
This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the board compatible with 0.1" headers and standard breadboards and perfboards. This board has two mounting holes and provides convenient pads for mounting the gas sensor’s required sensitivity-setting resistor.
| Description | Specs (3) | Pictures (6) | Resources (3) | FAQs (0) | On the blog (0) | Distributors (43) |
|---|
 |
Pololu MQ gas sensor carrier dimensioned with quarter for size reference. |
|---|
 |
Pololu MQ gas sensor carrier, top view. |
|---|
 |
Pololu MQ gas sensor carrier, bottom view. |
|---|
 |
Pololu MQ gas sensor carrier with sensitivity-setting resistor soldered in the horizontal orientation. |
|---|
 |
Pololu MQ gas sensor carrier with sensitivity-setting resistor soldered in the vertical orientation. |
|---|
 |
Pololu MQ gas sensor carrier with gas sensor (sold separately) soldered in place. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
