MMA7361LC 3-Axis Accelerometer ±1.5/6g with Voltage Regulator
This triple-axis accelerometer is a carrier board for the Freescale MMA7361LC XYZ-axis accelerometer, a great low-g sensor with analog voltage outputs and adjustable sensitivity (±1.5 g or ±6 g), and a 0g-detect digital output that signals when the board is in free-fall. The board has a 3.3V linear regulator that enables an input voltage range of 2.2-16 V. The breakout board has a 0.1″ pin spacing making it easy to use with standard solderless breadboards and 0.1″ perfboards.
Alternatives available with variations in these parameter(s): measurement range Select variant…
| Description | Specs (7) | Pictures (4) | Resources (5) | FAQs (0) | On the blog (0) |
|---|
File downloads
-
MMA7361LC datasheet (177k pdf)
Datasheet for the Freescale MMA7361LC MEMS 3-axis accelerometer (±1.5g, ±6g), a drop-in replacement for the original Freescale MMA7361L.
-
MMA7341LC datasheet (177k pdf)
Datasheet for the Freescale MMA7341LC MEMS 3-axis accelerometer (±3g, ±9g), a drop-in replacement for the original Freescale MMA7341L.
-
MMA73x1LC 3-axis accelerometer with voltage regulator schematic diagram (157k pdf)
Printable schematic diagram for the MMA73x1LC 3-axis accelerometer with voltage regulator.
-
MMA7361L datasheet (175k pdf)
Datasheet for the Freescale MMA7361L MEMS 3-axis accelerometer (±1.5g, ±6g). This part was used on products #1246 and #1251 manufactured before 2012. Since then, these products have been made with the MMA7361LC.
-
MMA7341L datasheet (175k pdf)
Datasheet for the Freescale MMA7341L MEMS 3-axis accelerometer (±3g, ±11g). This part was used on products #1247 and #1252 manufactured before 2012. Since then, these products have been made with the MMA7341LC.
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
