Alternatives available with variations in these parameter(s):
gender length color
Select variant…
 | Pololu Ribbon Cables with Pre-Crimped Terminals are available in a variety of lengths (3″, 6″, 12″, and 24″ shown; 36″ and 60″ not pictured). |
|---|
|
 | Ribbon Cable with Pre-Crimped Terminals is easy to peel apart (6″ M-F version shown). |
|---|
|
These premium jumper wires are made from 26 AWG stranded copper ribbon cable in a variety of lengths, and they are available with male crimp pins on both ends (M-M), female crimp pins on both ends (F-F), or one male and one female crimp pin (M-F). These crimp pins are designed to snap into our crimp connector housings to make connectors that work with 0.1″ (2.54 mm) male headers and female headers, solderless breadboards, and prototyping PCBs. Close-up pictures of the male and female crimp pins are shown below:
 | Ribbon Cable with Pre-Crimped Terminals male end. |
|---|
|
 | Ribbon Cable with Pre-Crimped Terminals female end. |
|---|
|
These cables give you the flexibility to make harnesses or assemblies that branch from one connector on one side to multiple connectors on the other (the left picture below shows an example of this). You can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy, as shown in the right picture below.
|
 | Micro Metal Geamotor with a custom cable made from wires with pre-crimped terminals. |
|---|
|
We also have these cables available with 1×1 housings already installed over the crimp pins. For more information, see our Ribbon Cable Premium Jumper Wires.
Compare all products in this category
Products in category “Ribbon Cable with Pre-Crimped Terminals”
These 3″ (7.5 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 3″ (7.5 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 3″ (7.5 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 6″ (15 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 6″ (15 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 6″ (15 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 12″ (30 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 12″ (30 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 12″ (30 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 24″ (60 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 24″ (60 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 24″ (60 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 36″ (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 36″ (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 36″ (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 60″ (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 60″ (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
These 60″ (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors. There are ten total wires, each a different color, and individual wires or groups of wires are easy to peel apart.
