This is a merged information page for Item #989.
View normal product page.
Pololu item #:
989
Brand:
Pololu
Status:
Active and Preferred
This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The black plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. The brackets are sold in pairs, and each bracket comes with two #2 screws and two nuts.
Alternatives available with variations in these parameter(s): color Select variant…
Compare all products in Motor Brackets or Brackets for Micro Metal Gearmotors.
Micro Metal Gearmotor mounted to a piece of acrylic with black mounting bracket version. |
---|
Micro Metal Gearmotor mounted to a piece of acrylic with black mounting bracket version. |
---|
Dimensions of the metal gear motor mounting bracket. |
---|
These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm × 12 mm × 26 mm metal gearhead motors first popularized by Sanyo’s 12GN series (e.g. NA1S…NA3S), such as our micro metal gearmotors. We offer these brackets in black plastic and white plastic, and we offer an extended version that might work better for particular applications.
Four #2-56×7/16" screws and four nuts are included.
|
|
These brackets have mounting holes that are very close to the output shaft end of the motor, which could cause mounting difficulties if your wheels have recessed hubs like the Pololu Wheel 42×19 mm. For such applications we recommend the extended version of this bracket.
Note: This bracket also works with the 1000:1 micro metal gearmotors, but because of its longer gearbox, it does not fully enclose the exposed gears the way it does on the other micro metal gearmotors.
3D model of a #1086 bracket (or #989 bracket, which is just a black version of the #1086).
3D model of a Micro Metal Gearmotor with Extended Motor Shaft and a #1086 bracket (or #989 bracket, which is just a black version of the #1086).
3D model of a Micro Metal Gearmotor and a #1086 bracket (or #989 bracket, which is just a black version of the #1086).
No FAQs available.
Forum user DrGFreeman has been posting about his custom Mini Sumo robot. He designed the chassis in CAD and 3D printed it; the model is available on...
My robot, Roku, was the champion of LVBots’ August mini-sumo competition. While I didn’t have the time or inspiration to make it look like anything...
The 2pi, built by Mark Moran, is a line following robot based on our 3pi robot. The 2pi uses our 100:1 micro metal gearmotors, motor brackets,...
Forum user Lukeness made a detailed post about the design of his wall-climbing robot, Ibex, which is now available for purchase on his website,...
This excellent guide from C.I.r.E. (Club de Informática, robótica y Electrónica) shows in detail how to build a fast (> 2 m/s) line-following...