This is a merged information page for Item #3588.
View normal product page.
Pololu item #:
3588
Brand:
Basicmicro
The MCP motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RS-232 serial, CAN bus, RC, or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system, and advanced features including internal scripting support and user-configurable I/O make it suitable for standalone applications. This version can supply a continuous 60 A per channel at voltages from 10 V to 60 V.
Alternatives available with variations in these parameter(s): continuous output current per channel maximum operating voltage Select variant…
Compare all products in MCP Advanced Motor Controllers.
|
MCP266 Dual 60A, 60VDC Advanced Motor Controller. |
|---|
 |
MCP266 Dual 60A, 60VDC Advanced Motor Controller. |
|---|
 |
MCP266 Dual 60A, 60VDC Advanced Motor Controller, top view. |
|---|
 |
MCP263 or MCP266 motor controller, bottom view. |
|---|
 |
Logic connectors on a MCP263 or MCP266 motor controller. |
|---|
 |
Power and motor connections on a MCP263 or MCP266 motor controller. |
|---|
The MCP series from Basicmicro (formerly Ion Motion Control) are a family of rugged, high-performance motor controllers with scripting support and other advanced features. They can supply brushed DC motors with 30 A, 60 A, or 120 A continuous at voltages from 10 V up to 60 V (depending on the model).
 MCP233 (34 V max) MCP236 (60 V max) |
 MCP263 (34 V max) MCP266 (60 V max) |
|
| Operating voltage: | 10 V to 34 V (MCP2x3 versions) 10 V to 60 V (MCP2x6 versions) |
|
|---|---|---|
| Continuous output current per channel: |
30 A | 60 A |
| Peak output current per channel: |
30 A | 60 A |
| Size(1): | 88 × 72 × 26 mm | 115 × 107 × 34 mm |
| Weight: | 140 g | 340 g |
| Price: | MCP233: $259.95 MCP236: $299.95 |
MCP263: $359.95 MCP266: $399.95 |
1 Including connectors and mounting flanges.
Each MCP motor controller has a USB interface that acts as a virtual serial (COM) port, allowing it to be controlled directly from a computer, and it features built-in commands for controlling acceleration, deceleration, distance, speed, voltage and current limits, and more. Several other interface modes are supported by the MCP as well: it can be controlled via TTL serial, RS-232 serial, or CAN bus (using the CANopen protocol) for use with an embedded or industrial system; RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC); or analog voltages for use with potentiometers or analog joysticks.
The MCP features an internal user scripting system and user-configurable I/O pins that allows it to be used as a standalone controller, eliminating the need for an additional processor in many situations. It can be operated without feedback for open-loop speed control, or it can be used with a variety of feedback types for closed-loop speed or position control. A wide range of closed-loop sensors are supported, including quadrature encoders, analog encoders, and potentiometers.
The MCP incorporates several protection features including temperature, current, over-voltage, and under-voltage limits. Several user-definable settings such as a maximum current limit and battery voltage limits are provided for more refined control. The controller uses regenerative braking but can be configured with a voltage clamp circuits to limit the regenerative voltage when used with switching power supplies. The Basicmicro VClamp is a voltage clamp specifically designed to work with the RoboClaw and MCP to suppress such voltage spikes and is rated for use with supplies up to 60 V and currents up to 60 A.
Note: As of May 2023, the MCP controllers no longer support bridging the two channels to control a single higher-current motor.
The MCP266 operates from 10 V to 60 V and can deliver a typical continuous output current of 60 A per channel. It has a USB Type B connector, a female DA-15 connector (sometimes called DB-15) for control and user I/O, and a rectangular “Molex”-style connector for feedback connections. (A mating connector is specified in its datasheet).
|
|
Up to 10 digital user inputs are available, 8 of which can be configured as analog inputs and 7 of which can be configured as PWM inputs. 2 user outputs are available; these are open-drain (they can drive low to sink up to 3 A or be set to high impedance) and are 40 V tolerant.
You might consider getting this DB15 screw terminal breakout adapter to make I/O pins more accessible.
|
|
|
|
|
|
Note: Basicmicro was formerly Ion Motion Control. Basicmicro uses the following product names and numbers for the MCP controllers:
| Size: | 4.5″ × 4.2″ × 1.3″1 |
|---|---|
| Weight: | 340 g |
| Motor channels: | 2 |
|---|---|
| Control interface: | USB; TTL serial; RS-232; CAN; RC servo pulses; analog voltage |
| Minimum operating voltage: | 10 V |
| Maximum operating voltage: | 60 V |
| Continuous output current per channel: | 60 A |
| Peak output current per channel: | 60 A |
User manual for the MCP advanced brushed DC motor controllers.
Go here to find links to all of the downloadable RoboClaw and MCP resources, including datasheets for the individual controllers, drivers, source code libraries, and CAD drawings.
These application notes from Basicmicro explain their motor controllers and some of their features and modes of operation.
No FAQs available.
DB15 Screw Terminal Adapter for MCP23X/26X Advanced Motor Controllers with included hardware. DB15 screw terminal adapter mated to an MCP266...
RoboClaw 2×60AHV, 60VDC Motor Controller. We are excited to offer eight new powerful motor controllers from Basicmicro (formerly Ion Motion...
