This is a merged information page for Item #1905.
View normal product page.
Pololu item #:
1905
Brand:
PCX
These six-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
Alternatives available with variations in these parameter(s): pins Select variant…
Compare all products in Crimp Connector Housings.
 |
Example of a custom cable made with wires with pre-crimped terminals and crimp connector housings. |
|---|
 |
Micro Metal Geamotor with a custom cable made from wires with pre-crimped terminals. |
|---|
 |
Premium jumper wire female end. |
|---|
 |
Premium jumper wire male end. |
|---|
 |
Dimensions (in mm) for single-row 0.1" crimp connector housings. |
|---|
 |
Dimensions (in mm) for double-row 0.1" crimp connector housings. |
|---|
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings (note: getting the wires out is possible but not as easy).
You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other; you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy:
|
|
The following video talks about some of our various wire and cable options and includes a short demonstration of how to use these housings:
And this customer-made video shows how to make custom cables with these crimp connector housings using pre-crimped wires and self-crimped wires made with our crimping tool.
 |
 |
| Pins | A (mm) | B (mm) |
|---|---|---|
| 1×1 | – | 2.54 |
| 1×2 | 2.54 | 5.08 |
| 1×3 | 5.08 | 7.62 |
| 1×4 | 7.62 | 10.16 |
| 1×5 | 10.16 | 12.70 |
| 1×6 | 12.70 | 15.24 |
| 1×7 | 15.24 | 17.78 |
| 1×8 | 17.78 | 20.32 |
| 1×9 | 20.32 | 22.86 |
| 1×10 | 22.86 | 25.40 |
| 1×12 | 27.94 | 30.48 |
| 1×16 | 38.10 | 40.64 |
| 1×20 | 48.26 | 50.80 |
| 2×2 | 2.54 | 5.08 |
| 2×3 | 5.08 | 7.62 |
| 2×4 | 7.62 | 10.16 |
| 2×5 | 10.16 | 12.70 |
| 2×6 | 12.70 | 15.24 |
| 2×7 | 15.24 | 17.78 |
| 2×8 | 17.78 | 20.32 |
| 2×10 | 22.86 | 25.40 |
| 2×12 | 27.94 | 30.48 |
| 2×13 | 30.48 | 33.02 |
| 2×16 | 38.10 | 40.64 |
| 2×17 | 40.64 | 43.18 |
| 2×18 | 43.18 | 45.72 |
| 2×20 | 48.26 | 50.80 |
We have seen these connectors referred to as “DuPont-style” connector housings, though we have not verified that they can be used as direct substitutes for connector housings formerly made by DuPont. We intend for them to be used with our wires with pre-crimped terminals or our male or female crimp pins.
| Pins: | 1 x 6 |
|---|---|
| Spacing: | 0.1 in |
This video, created by customer Derek Molloy, discusses various options for making custom cables with our crimp connector housings, such as by using our pre-crimped wires or crimping your own with our wider crimping tool, though the same technique works with our narrower crimping tool as well. The section on using the crimping tool starts at around 4:15.
No FAQs available.
No blog posts to show.