Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 4.5V, 2 A/Phase

This is a merged information page for Item #1475.
View normal product page.

Pololu item #: 1475
Brand: SOYO
Status: Active and Preferred 
RoHS 3 compliant


This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in).

Compare all products in Stepper Motors or NEMA 23 Stepper Motors.

Pictures

Dimensions (in mm) of 57mm square (NEMA 23) by 76mm stepper motor.

6-lead, unipolar/bipolar stepper motor wires are terminated with bare leads.

6-lead, unipolar/bipolar stepper motor wiring diagram.

5mm Pololu universal aluminum mounting hub on a stepper motor with a 5mm-diameter output shaft.

The inside of a bipolar stepper motor (SOYO NEMA 14-size).

Pololu’s assortment of stepper motors.




6-lead, unipolar/bipolar stepper motor wires are terminated with bare leads.

6-lead, unipolar/bipolar stepper motor wiring diagram.

Overview

This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in). The motor has six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers. When used with a unipolar stepper motor driver, all six leads are used. When used with a bipolar stepper motor driver, the center-tap yellow and white wires can be left disconnected (the red-blue pair gives access to one coil and the black-green pair gives access to the other coil). We recommend using it as a bipolar stepper motor and controlling it with an appropriately powerful bipolar stepper motor driver, such as our High-Power Stepper Motor Driver 36v4, or our Tic 36v4 High-Power Stepper Motor Controller. In particular, the Tic makes control easy because it supports six different interfaces (USB, TTL serial, I²C, RC, analog voltages, and quadrature encoder) and is configurable over USB with our free configuration utility.

NEMA 23 stepper motor (item #1475) mounted with a steel L-bracket for NEMA 23 stepper motors.

Our 1/4″ universal mounting hub and 1/4″ scooter wheel adapter can be used to mount objects on the stepper motor’s 1/4″-diameter output shaft, and we carry a NEMA 23 steel bracket for securely mounting this stepper motor to a flat surface.

Specifications

More specifications are available in the datasheet (39k pdf).

Dimensions

The following diagram shows the stepper motor dimensions in mm. The output D-shaft has a 0.25″ (6.35 mm) diameter with a section that is flattened by 0.5 mm. This shaft works with our 1/4″ universal mounting hub and 1/4″ scooter wheel adapter.

The inside of a bipolar stepper motor (SOYO NEMA 14-size).

Stepper Motor Applications

Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:

Pololu’s assortment of stepper motors.

Note: This stepper motor is SOYO part number SY57STH76-2006A.

Dimensions

Size: 56.4 mm square × 76 mm1
NEMA size: 23
Weight: 1000 g
Shaft diameter: 6.35 mm

General specifications

Shaft type: 1/4 inch "D"
Current rating: 2000 mA2
Voltage rating: 4.5 V
Holding torque: 190 oz·in
Steps per revolution: 200
Resistance: 2.25 Ohm2
Inductance per phase: 3.6 mH
Number of leads: 6
Lead length: 30 cm

Notes:

1
Not including the shaft.
2
Per coil.

File downloads

Frequently-asked questions

I want to control a 3.9 V, 600 mA bipolar stepper motor, but this driver has a minimum operating voltage above 3.9 V. Can I use this driver without damaging the stepper motor?

Yes. To avoid damaging your stepper motor, you want to avoid exceeding the rated current, which is 600 mA in this instance. All of our stepper motor drivers let you limit the maximum current, so as long as you set the limit below the rated current, you will be within spec for your motor, even if the voltage exceeds the rated voltage. The voltage rating is just the voltage at which each coil draws the rated current, so the coils of your stepper motor will draw 600 mA at 3.9 V. By using a higher voltage along with active current limiting, the current is able to ramp up faster, which lets you achieve higher step rates than you could using the rated voltage.

If you do want to use a lower motor supply voltage for other reasons, consider using our DRV8834 or STSPIN-220 low-voltage stepper motor drivers.

How do I connect my stepper motor to a bipolar stepper motor driver?
The answer to this question depends on the type of your stepper motor and how many wires it has. We have an application note that details possible methods for connecting stepper motors to bipolar drivers and controllers and the advantages and disadvantages of each option.

On the blog

No blog posts to show.