Electronics » Computer Interface »

CP2102N USB-to-Serial Adapter Carrier

This is a merged information page for Item #1317.
View normal product page.

Pololu item #: 1317
Brand: Pololu
Status: Active and Preferred 

This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for the Silicon Labs CP2102N USB-to-UART bridge that provides access to all of its control signal pins and GPIO pins.

Compare all products in Computer Interface or Signal Adapters and Extenders.

Pictures

CP2102N USB-to-serial adapter carrier.

CP2102N USB-to-serial adapter carrier with included optional headers.

CP2102N USB-to-serial adapter carrier, labeled pinout.

CP2102N USB-to-serial adapter carrier with included 6-pin 0.1″ right-angle female header installed.

CP2102N USB-to-serial adapter carrier in a breadboard with included 0.1″ male headers installed.

CP2102N USB-to-serial adapter carrier, bottom view with dimensions.

CP2102N USB-to-serial adapter carrier, top view.

VIO=VDD SMT jumper on the bottom of the CP2102N USB-to-serial adapter carrier.

Schematic diagram of the CP2102N USB-to-serial adapter carrier.

Standard packaging for the CP2102N USB-to-Serial Adapter Carrier.

Overview

CP2102N USB-to-serial adapter carrier, bottom view with dimensions.

This USB-to-serial adapter is a breakout board for the Silicon Labs CP2102N USBXpress USB-to-UART bridge, and it is a great solution for connecting microcontroller projects and other logic-level serial devices to a personal computer. The tiny unit measures only 0.6″ × 0.95″ including its Micro-USB connector. It offers several options for accessing the data, control, and GPIO pins on the CP2102N, all of which are made available on a 0.1″ spacing.

This board uses 3.3 V signal levels by default, but the signal pins can tolerate higher voltages, allowing the adapter to be used with 5 V systems that see 3.3 V as a logic high. The green LED on the SUSPEND line indicates an active USB connection when lit.

The adapter looks like a standard virtual serial port (COM port) to the computer’s operating system, which means it can be used with any software designed to work with a serial port (even a legacy RS-232 port). The CP2102N is a full-speed USB 2.0 device and allows baud rates of up to 3 Mbps. Drivers are available from Silicon Labs for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10, Linux, and Mac OS X.

This product requires a USB A to Micro-B cable (not included) to connect to a computer.

If you do not need access to all of the serial control signals, consider the Pololu USB AVR Programmer v2.1 as an alternative. In addition to its functionality as an AVR programmer, it can be used as a USB-to-TTL serial adapter with two configurable serial handshaking lines and support for both 3.3 V and 5 V operation.

For most applications, this CP2102N carrier can be considered a drop-in replacement for our older CP2104 USB-to-Serial Adapter Carrier with a few improvements like a higher maximum baud rate and re-programmable configuration ROM.

Specifications

• Dimensions: 0.6″ × 0.95″ including connector
• USB standard: USB 2.0 (full speed)
• Connector: USB Micro-B
• Logic voltage level: 3.3 V (5 V tolerant)
• Supported baud rates: 300 bps to 3 Mbps
• Supply current: 15 mA

Using the adapter

Pinout

Pin	Type	Function
VDD	Power	3.3 V voltage regulator output
VBUS	Power	USB bus voltage (5 V)
GND	Power	Ground
RST	In	Device reset
TX	Out	Asynchronous serial data transmit (idle high)
RX	In	Asynchronous serial data receive
CTS	In	“Clear to send” control input (often used with RTS)
RTS	Out	“Ready to send” control output (often used with CTS)
DSR	In	"Data set ready" control input (active low) (often used with DTR)
DTR	Out	"Data terminal ready" control output (active low) (often used with DSR)
DCD	In	"Data carrier detect" control input (active low)
RI	In	"Ring indicator" control input (active low)
SUSPEND	Out	Driven high when in USB suspend state
SUSPEND	Out	Driven low when in USB suspend state (connected to green LED)
GPIO.0	I/O	User-configurable inputs or outputs
GPIO.1
GPIO.2
GPIO.3

Connections

All of the adapter’s pins are available in two rows spaced 0.5″ apart along the sides of the board. This allows any pin to be accessed easily while the adapter is plugged into a solderless breadboard, as shown in the left picture below.

Alternatively, a 1×6 header can be soldered to the end of the board, as shown in the right picture below. This gives access to six signals (RTS, RX, TX, VBUS, CTS, and GND) that are commonly found on FTDI cables and other similar USB-to-serial adapters. As a result, this CP2102N adapter board can be used as a drop-in replacement for an FTDI cable in many applications, such as programming Arduino-compatible boards.

CP2102N USB-to-serial adapter carrier in a breadboard with included 0.1″ male headers installed.

CP2102N USB-to-serial adapter carrier with included 6-pin 0.1″ right-angle female header installed.

The carrier board ships with a 1×25 straight male header strip, a 1×6 right-angle male header strip, and a 1×6 right-angle female header as shown below. You can also solder wires directly to the pads for the smallest installation.

Using a different VIO

This carrier board connects the VIO pin of the CP2102N to VDD by default, setting its logic voltage level to the 3.3 V provided by the IC’s built-in voltage regulator. If you want to use a lower logic voltage, you can disconnect VIO from VDD by cutting the thin trace between the two pads of the surface-mount jumper shown to the right. You can then solder a thin wire to the exposed via labeled “VIO” and connect it to a separate voltage supply (as low as 1.71 V).

Warning: We do not recommend externally supplying VIO to this board while it is not connected to USB, as this can cause it to draw excessive current (up to a few hundred milliamps).

Schematic diagram

This schematic is also available as a downloadable PDF (169k pdf).

Advanced features

You do not need to be familiar with details of the CP2102N to use this board as a basic USB-to-serial adapter, but the CP2102N also has specialized features including four general-purpose I/O (GPIO) pins and the ability to be customized by configuring its internal EEPROM. For advanced users interested in these features, we recommend careful reading of the CP2102N datasheet (619k pdf). Additional resources, including application notes referenced by the datasheet, can also be found on the CP2102N product page on the Silicon Labs website.

Frequently-asked questions

No FAQs available.

On the blog

• 

  New products: CP2102N serial adapter and another USB Type-C breakout. Should we do more with USB-C?

  by Kevin - 24 December 2020

  Seven years ago, we released a CP2104 USB-to-Serial Adapter Carrier, our first product with a USB Micro-B connector (we had only used Mini-B up to...