Mini Plastic Gearmotors »
180:1 Mini Plastic Gearmotor, 90° 3mm D-Shaft Output
This compact, inexpensive plastic gearmotor (brushed DC motor with a 180:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range. The gearbox has a 9.7mm-long, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch helps protect the gears from excessive loads.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 4.5 V | 80 RPM, 80 mA | 2.2 kg⋅cm (30 oz⋅in), 800 mA |
Alternatives available with variations in these parameter(s): shaft type no-load speed @ 4.5V extended motor shaft? Select variant…
| Description | Specs (11) | Pictures (13) | Resources (7) | FAQs (1) | On the blog (0) |
|---|
Dimensions
| Size: | 54.5 x 20 x 13.8 mm1 |
|---|---|
| Weight: | 19.5 g |
| Shaft diameter: | 3 mm |
General specifications
| Shaft type: | 90° 3mm D |
|---|---|
| Typical operating voltage: | 4.5 V |
| Gear ratio: | 180:1 |
| No-load speed @ 4.5V: | 80 rpm |
| No-load current @ 4.5V: | 80 mA |
| Stall current @ 4.5V: | 800 mA |
| Stall torque @ 4.5V: | 30 oz·in2 |
| Extended motor shaft?: | N |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
