Jrk 21v3 USB Motor Controller with Feedback (Connectors Soldered)

Pololu item #: 1394
Brand: Pololu supply outlook
Status: End-of-Life Rationing 
RoHS 3 compliant

Price break Unit price (US$)
1 71.95
5 66.19


backorders allowed

The Jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can be used without feedback as an open-loop speed control. The continuous output current is approximately 3 A in the recommended operating range of 8 V to 28 V, with derated performance down to 5 V and transient protection to 40 V. This version ships with connectors installed as shown (no soldering required).

Alternatives available with variations in these parameter(s): version Select variant…

 Description Specs (15) Pictures (21) Resources (11) FAQs (2) On the blog (1) 

Pololu Jrk 21v3 USB motor controller with included hardware soldered in (fully assembled).

Pololu Jrk 21v3 USB motor controller with dimensions.

Pololu Jrk 21v3 USB motor controller with feedback, labeled top view.

Comparison of the newer Jrk G2 21v3 (black PCB) with the original Jrk 21v3 (green PCB).

The Input tab of the Jrk Configuration Utility

The Feedback tab of the Jrk Configuration Utility

The PID tab of the Jrk Configuration Utility

The Motor tab of the Jrk Configuration Utility

The Errors tab of the Jrk Configuration Utility

The Jrk plot window, showing overshooting (Derivative Coefficient = 0).

The Jrk plot window, showing undershooting (Derivative Coefficient = 10).

The Jrk plot window, optimized derivative term (Derivative Coefficient = 7.5).

The Jrk plot window, showing how the integral term can reduce the error to near zero.

The Jrk plot window, showing all variables simultaneously.

A basic feedback system controlling a LEGO turret with the Jrk 21v3, front view.

A basic feedback system controlling a LEGO turret with the Jrk 21v3.

USB control.

TTL serial control.

RC / pulse width control.

Analog control.

Connecting a linear actuator with feedback to a Jrk 21v3 motor controller.


Related Products

Jrk G2 21v3 USB Motor Controller with Feedback
Jrk G2 21v3 USB Motor Controller with Feedback (Connectors Soldered)
Jrk G2 18v19 USB Motor Controller with Feedback
Jrk G2 24v13 USB Motor Controller with Feedback
Jrk G2 18v27 USB Motor Controller with Feedback
Jrk G2 24v21 USB Motor Controller with Feedback
Jrk 21v3 USB Motor Controller with Feedback
Jrk 12v12 USB Motor Controller with Feedback
RoboClaw 2x15A Motor Controller (V6B)
Thin (2mm) USB Cable A to Mini-B, 5 ft., Low/Full-Speed Only
USB Cable A to Mini-B, 5 ft
Glideforce LACT10P-12V-20 Light-Duty Linear Actuator with Feedback: 50kgf, 10" Stroke (9.8" Usable), 0.57"/s, 12V
MC33926 Motor Driver Carrier
i00600 Torxis Servo 1600 oz.in. 1.5 sec/90 deg
Micro Maestro 6-Channel USB Servo Controller (Assembled)

Related Categories

Pololu Jrk Motor Controllers with Feedback
Motors and Gearboxes
Linear Actuators
Glideforce Light-Duty (LD) Linear Actuators
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Pololu Simple Motor Controllers
Development Boards (Programmable Controllers)
RC Interface
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors