ACS714 Current Sensor Carrier -30A to +30A

Pololu item #: 1187
Brand: Pololu
Status: Obsolete 
RoHS 3 compliant

This product has been discontinued.

Please consider the ACS724 Current Sensor Carrier -30A to +30A as an alternative.

This board is a simple carrier of Allegro’s ±30A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a bidirectional current input with a magnitude up to 30 A and outputs a proportional analog voltage (66 mV/A) centered at 2.5 V with a typical error of ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

 Description Specs (8) Pictures (3) Resources (4) FAQs (0) On the blog (0) 

Dimensions

Size: 0.7" x 0.8"
Weight: 1.7 g

General specifications

Current sense: 0.066 V/A1
Minimum logic voltage: 4.5 V
Maximum logic voltage: 5.5 V
Supply current: 13 mA

Identifying markings

PCB dev codes: cs01a, cs01b
Other PCB markings: 0J1214, 0J12458, white box with red X

Notes:

1
When Vcc is 5 V.

Related Products

ACS724LLCTR-30AB Current Sensor Carrier -30A to +30A
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
T Connector Male-Female Pair
Screwless Terminal Block: 2-Pin, 0.1″ Pitch, Side Entry (3-Pack)
Premium Jumper Wire 50-Piece 10-Color Assortment F-F 6"

Related Categories

ACS724 Current Sensor Carriers
Current Sensors
Terminal Blocks
Premium Jumper Wires
Electronics Prototyping
Sensors
Motion Control Modules
Motors and Gearboxes
RC Servos
Pololu High-Power Motor Drivers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors